Cabsat industrial limited

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsCPE WiFi Router

Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME

Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME

  • Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME
  • Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME
Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME
Product Details:
Place of Origin: Shenzhen, China
Model Number: CS-100ME
Payment & Shipping Terms:
Minimum Order Quantity: 1000pcs
Packaging Details: Stanard Carton
Delivery Time: 20-25 work days
Payment Terms: T/T, L/C
Contact Now
Detailed Product Description
Model: WIFI Mesh Router Protocol: IEEE802.11n/802.11g/802.11b/802.11ac/802.3/802.3u/802.11v/r
WLAN Rate: Up To 1167Mbps Material: Plastic
Color: White Warranty: 1 Year
Antenna: 2*3dBi Dual-band Omnidirectional Built-in Antenna
High Light:

gpon optical network terminal

,

ftth gpon

Dual-band omnidirectional built-in antenna 2.4G/5G WIFI Mesh Router CS-100ME

1.Summary

 

     MESH routing system CS-100ME is a dual-band home wireless networking suite product. Each node has a 10/100Mbps WAN/LAN adaptive port, a 10/100Mbps adaptive LAN port and a wireless transmission rate of 1167 Mbps.

 

2.Product Specification

 

2.1 Basic configuration

 

The device name Mesh Wi-Fi  
The device type Mesh Wi-Fi (Table-Top)  
The device model CS-100ME  
WAN 110/100Mbps WAN/LAN adaptive port  
LAN 110/100Mbps WAN/LAN adaptive port  
WLAN 2.4G 300Mbps,5G 867Mbps  
Hardware Indicators The main chip RTL8197FNT-VE4-CG  
Clock Speed 600MHz  
Flash Storage 8MByte or Higher SOP8
Ram Capacity 64MByte or Higher  
Power Specification 9V1A  
Light A Comprehensive Light (Red or yellow or green)
Reset Reset  
Aerials 2*3dBi Dual-band omnidirectional built-in antenna

 

 

Wireless transmission rate

 

1167Mbps  
Wireless Standards 802.11b/g/n 2.4GHz; 802.11ac/a/n 5GHz;  
Transfer Standards 802.3;802.3u;  
  MESHNetworking standards 802.11s;  
 

 

 

Roaming Standard

 

802.11v/r;  
 

2.2 Interface requirements

 

 
Category Requirement Standard

Wired Interface

 

WAN ports 1*10/100Base-T ports,It meets the IEEE802.3/802.3u standard supports full-duplex/half-duplex flow control.
LAN ports 1*10/100Base-T ports,It meets the IEEE802.3/802.3u standard and supports full-duplex/half-duplex flow control.
Power Interface

One power interface, router uses external power adapter to supply power. The external power adapter shall:

1. Meet the EMC requirements of YD/T 983 and pass CCC certification;

2. Input voltage: 198V-242V-50Hz;

3. Output voltage DC: 9V + 5%, ripple range + 100mV, output current: 1A;

4. The MTBF time of power supply is more than 30000 hours.

5. The power interface of the equipment itself and the DC output interface of the power adapter should be a unified international standard circular interface with a diameter of 2.1 mm.

6. The DC output power supply line of the adapter can be equipped with EMI absorption magnetic ring.

7. Under normal conditions, the insulation resistance between the metal housing of the equipment and the power cord shall not be less than 50M.

8. There should be lightning protection and surge protection tests. The lightning protection level should be at least 1.5KV.

Wireless Interface Wi-Fi Wireless Network

It meets the standard of 802.11protocol,supports802.11b/g/n/a/ac,supports 2.4 GHz and 5 GHz,and has a wireless rate of 1167 Mbps.

Two built-in 3dBi omnidirectional dual-band antennas;

Up to 32 wireless devices are allowed.

 

2.3 Key and indicator

 

  Functional description
System reset Press the RST button for 6 seconds, release the indicator after flash, turn the indicator into long light and restart the system, and finally return the flashing indication to restore the factory settings successfully.
Indicator light

Green Long Bright: Good Connection Quality

Yellow Long Bright: General Connection Quality

Red Long Bright: Connection Failure

 

 

3.Basic requirements

3.1 Hardware requirements

    LAN upstream devices should ensure the stability and reliability of hardware structure, antenna connection, etc. RAM is not less than 64 MByte, Flash is not less than 8 MByte.

 

Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME 0Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME 1

 

Contact Details
Cabsat industrial limited

Contact Person: Mr. Yonchin Shou

Tel: +86-18126459770

Send your inquiry directly to us (0 / 3000)